Quote:
Originally Posted by Merlin66
I did make contact with Steve at ATIK...
He thinks it could be a PCB failure and an estimated cost 200 Euro.
That would be around $400 with postage etc.
|
Hi M,
In that case, you may consider asking a
local electronics tech to look at the PCB / camera as a whole for any sign of failure, typically poor/cracked solder joints, loose connector or dead/dying/leaking capacitors. This can sometimes be diagnosed by inspection, lightly tapping the PCB, application of heat/cold or an ESR meter for some capacitors. A competent electronics tech even without a circuit diagram or direct product experience, should be able to detect and repair certain such faults.
Best
JA