|
Stephen
Thanks for replying
I don’t use the PC direct method , I currently use EQ direct ( laptop to mount , hand controller unplugged not used )
I read Gion Kunz thread on CN regarding Ascom on Stellarium 0.19.3 so sort of got my head around it now but one procedure I can’t work out and that is when you open Stellarium and select EQMOD 5/6 in the “Ascom telescope chooser” and then press ok , this should launch the Ascom Setup to find your port to connect the mount. When this is done you hit Ok at the bottom and go back to the Ascom chooser window and hit ok. After this I normally hit connect button on the StellariumScope window which then launches EQMOD
So how does Stellarium launch EQMOD now
Hope my sequence makes sense
|