16-04-2013, 12:54 PM
|
|
Registered User
|
|
Join Date: Mar 2012
Location: Mornington Peninsula, Australia
Posts: 3,950
|
|
Hi again,
I have another response from the store, unfortunately its not super clear and is as follows:
"ok, if your EOS doesn´t have an full formated chip, than these
adapter will work:
http://www.teleskop-express.de/shop/...Baulaenge.html
Not the M42 one, the thread here differs from the T2!
2” focuser – MPCC – TSOAG9T2 (11,2mm) - T2-EOSs (0mm) – Canon (44mm)
--> 55,2mm and this should be possible with the MPCC."
I assume that means it will come out at a distance of 57mm as the , does anyone know if this will this affect the performance of the MPCC?
Unfortunately he didn't send a link to the T2 adaptor required.
I think the link following is meant to be the TSOAG9T2 as listed above but is listed at 3.5mm which would bring the MPCC to a distance of 58.5mm, even further from the 55mm.
http://www.teleskop-express.de/shop/...terthread.html
On another note is the T2 opening going to introduce vignetting?
Maybe i should have put this thread under astrophotography discussion as someone must have a DSLR, OAG setup. i am battling to get a handle on this i read elsewhere that if using a T2 adaptor the prism gets blocked by the threading...
|