View Single Post
  #22  
Old 13-09-2018, 02:05 PM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 6,932
Yep.. all clear.
As demonstrated on your drawings, I also wanted to reduce misalignment of light beam relative to tube (truss frame) axis... because this scope will be mounted on EQ6 and used for AP, and misalignment such as this potentially reduces pointing accuracy somewhat (it is possible to compensate that with Bartels software, but it needs to be done every time collimation was changed… not very often).


Last edited by bojan; 13-09-2018 at 02:20 PM.
Reply With Quote