|
OK the distance between the holes is 141.5mm center to center, all three form a triangle with the same spacing. The maximum distance clear between the sides is 208mm so this would be the max diam of the base of the telescope mount base although the plate that it bolts to is a little less at 202mm diameter. Looking at what appears to be your scope on the Celestron site suggest that it may or may not, the design of the forks and base are a lot different to mine (see attached photo) which is a 1994 C8.
Hope this helps you decide.
Roger
Last edited by rogerco; 04-02-2013 at 06:22 PM.
Reason: added photo
|