View Single Post
  #71  
Old 05-02-2017, 05:23 PM
mynameiscd's Avatar
mynameiscd (Andy)
Registered User

mynameiscd is offline
 
Join Date: Jan 2017
Location: Langkoop, Victoria
Posts: 457
Hardwicke bay scrub observatory

Hi all
This is my first post and I decided to share my work in progress observatory.
As im in the building game I get plenty of left over building products.
I used a 75mm foam core filled panel over steel stud frame.
I like the thermal properties and the light weight construction of the panel.
The roof slides apart so when its cold I can close up to just a small opening .
Ive rendered the walls to blend into the sandy scrub and my artist wife couldnt bare to look at a box so she got busy and decorated the outside. She keeps on trying to get to the walls inside as well.
The pier is a safety bollard with the bottom cut off set in concrete and core filled as well.
I still have a sand floor which can be a bit scary around astro gear but im doing the floor after I get the roof fully water tight.
We get driving rain here a alittle gets in.
Our closest neighbor is about 600 meters away and because of the dunes there is very little light pollution.
I'll keep udating as I go
Cheers
Andy
Attached Thumbnails
Click for full-size image (20160925_142226~01.jpg)
175.6 KB286 views
Click for full-size image (20160925_142455~01.jpg)
181.0 KB233 views
Click for full-size image (20170129_103034~01.jpg)
181.0 KB251 views
Click for full-size image (20170129_102922~01.jpg)
146.4 KB295 views
Click for full-size image (20160925_142440~01.jpg)
176.1 KB264 views
Click for full-size image (20170129_102800~01.jpg)
185.3 KB284 views
Click for full-size image (20160925_142536.jpg)
134.8 KB249 views
Reply With Quote