View Single Post
  #2  
Old 11-09-2020, 10:52 AM
Merlin66's Avatar
Merlin66 (Ken)
Registered User

Merlin66 is offline
 
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,904
Peter,
I use a "very similar" (but cheaper!!!) 60 mm finder as an eFinder on my C11.
In my case I added a ADM mini-rail to the scope then removed the finder rings from the dovetail and remounted them on ADM clamps.
This allows me to move the finder around for balancing.


For your set-up that's probably over kill.
On my smaller scopes with rings I've used a short length of 25 x 12 x 3 mm aluminium U channel mounted on top of the rings and then remounted the finder rings onto the channel. Hope that makes sense.
(I probably have a spare bit of the channel in the "box", let me know if I can help)
https://www.actionaluminium.com.au/w...logue-2018.pdf (page 14 CU25123)

Something like this would probably work OK.

https://www.bunnings.com.au/metal-ma...annel_p1079323
Reply With Quote