View Single Post
Old 02-02-2009, 08:49 PM
GrahamL's Avatar
pro lumen

GrahamL is offline
Join Date: Jun 2006
Location: ballina
Posts: 3,179
Thanks guys I'm understanding things a little better now
I've milled some slots in the ends of my tangent arms now and will fit a
small shoulder screw with a spacer that will do two things ..keep the arm reasonably close to being perpendicular to the encoder mounting bracket at the top of the bearing with a small amount of play .. and if needed allow some sideways movementshould the encoder become a little off centre ?
Reply With Quote