View Single Post
Old 04-01-2009, 12:37 PM
GrahamL's Avatar
pro lumen

GrahamL is online now
Join Date: Jun 2006
Location: ballina
Posts: 3,179
Well I got some encoders and cable for x-mass .. so let the fun begin

I was kindly given an encoder ready bolt .. which I had some doubts about being able to fit to my existing ground board as the bush needed to be removed (glued in there)and drilled out for the larger bolt.Thankfully I smacked it out without much damage and was able to flip it to get a nice snug fit again..the torn ply underneath will be hidden by the locking plate..which I had to make another of as the overall thickness of the rocker box /ground board stopped the bolt locking down by about 5 mm.

The pole for the ago navis is 32 mm I'm planning to run the cable down the inside of the tube atm.

a few pics and a birds eye view of proceedings so far
Attached Thumbnails
Click for full-size image (ext2.jpg)
144.9 KB70 views
Click for full-size image (ex5.jpg)
133.2 KB62 views
Click for full-size image (ext 4.jpg)
122.8 KB76 views
Reply With Quote