Quote:
Originally Posted by billdan
Hi Chris,
Sorry your worm swap didn't come off, at least you eliminate them as the cause.
Last night I tested my EQ6 with guiding assist and my P-P arcsecs in RA was 28 arcsecs (normal for EQ6) and PA was varying 1-3 arc minutes.
I then did a 2 hour run at NGC300 and the photo below shows the guiding I got after 2 hours. Even though only the last 800 secs are shown.
You should also be able to guide out your PE error if its a slow PE curve, if its high freq movement that would be more difficult.
Bill
|
What's the scope on there? What focal length are you at? That's still pretty good - that RA RMS 0f 0.1 - I'm over 1.0 at this moment.
Btw, I've got my RC10 on, no reducer, so at 2000mm.