Does anyone have a photograph or schematics of the connections of the mosfet 4ch board?
I just can't get my head around how to get mine working.
All four channels are set to 100%, even if i have all signal cables disconnected.
The connections I have made is GND and Signal between the Arduino and the input to the mosfet board.
On the 12v side of the mosfet board I have connected 12v and GND to the 12v input terminal, the ch1 - ch4 i have connected 12v and gnd to the phono terminals.
Some questions i have are;
Do you guys also connect the 5v+ to the input side of the mosfet board?
I have attached a photo but it isn't the best one.
|