Quote:
Originally Posted by peter_4059
Chris,
Have a look at this thread:
http://stargazerslounge.com/topic/11...uide-settings/
Chris Shillito is the creator of EQMOD. He recommends setting the guide rate at 0.5 - too high and the pulse duration is lower than what the PC can do (20ms) and you overcorrect. I've got mine at 0.2 and my guiding is working quite well.
Peter |
And it also says:
Quote:
Set them to 0.5 to start with and see how things go. You don't want them too high as small errors will require very short guide pulses and these are less likely to be accurately implemented. On the other hand you don't want them so low that they cannot keep up with the max rate of change present in your mounts periodic error.
Chris.
|
It depends on your particular system.