|
In N.S.W. At Coffs Harbour:-
www.plasticsfactory.com.au
1mm black styrene.
Comes in 2440mm x 1220mm sheets.
High gloss on one side and semi flat on other side.
Semi flat side can be made dead flat by rubbing with wet and dry paper.
Some people use KLYDEX.
This is better than klydex because it does not go soft on warm days, is self supporting and finish on outside is proffessional looking. High impact material.
Can be cut with a sharp stanley knife or shaped easily and bent around
secondary cages etc.
Excellent for DIY for dobs etc.
I built my 20 inch obsession clone in 2001.
this material has not moved,or cracked or changed at all in that time.
A friend has also built a 16 inch obsession clone as well and very happy with this material.
If anybody wants a sample of this material I can send a piece to you.
Peter Langdown
|