Quote:
Originally Posted by renormalised
Atik have a 2" filter wheel, so it shouldn't be too much of a problem, and the Atik filter wheels are fairly thin, which also helps. If you couldn't get an Atik wheel, you could probably shop around for something similar.
|
It may well be a problem if Paul wishes to use the 1 1/4 filter system he already has and has indicated in his initial post he would hope to use.
There are plenty of 2" filter wheels out there and I have no doubt a 2 inch wheel and filters will be suitable. I have in fact got 2 X 2" filter wheels and have used them on a CCD bigger than this.
My answer was in regard to using an 1 1/4 wheel.