[Hoges (John)]

Denkmeier std binoviewer setup. With 1 1/4 OCS/tube and optical nosepiece. Excellent nic - there's a couple of orange paint marker dots on one of the eyepiece holders to line up some of my eyepieces. (see pic) Slight mark on the nosepiece tube from the locking screw. Also, the lens in the OCS has a small amount of play - it always had this from new and I never found it to be a problem so left it well enough alone.


Collimation has always struck me as being spot on - although some of my pairs of eyepieces have needed a little rotating....hence the dots.


To use at 0X you'll need 114.5mm of in-travel. Otherwise you can rig it for 1.4x and achieve focus close to normal position.


reduced to: $400 plus postage. Or pick up Ballarat, Vic, area.