Gday Chris
Earlier you posted
Quote:
Setup > Statistics tells me version A3S5
|
As such you have an Audiostar, and must select that handbox type.
StarPatch now has a lot of smarts in it to prevent cross loading firmware, and selecting the correct handbox is the first part of that.
The 497s use a motorola CPU
The 497EP was an intermediate handbox that came out with a new Toshiba processor, and only lasted a year or so.
The Audiostar is a 497EP with an added daughterboard for sound.
There are also 2 versions of Audiostar, as Meade changed the memory chips used part way through.
Sooooooooo, pick Hbx type "Audiostar" and the patches etc will become visible.
Quote:
So which program is "my app"
|
My PEC editor
http://members.optusnet.com.au/johansea/
Andrew
PS IIRC, it will autoset the baud and smartload to 9600/off automatically
as the higher bauds and smartload are only available in the full version.
It may auto set the baud to fast for a short while,
( to show what it can do ), then throttle back,
but other than that, is fully functional in free mode.