|
Pat, on which sensor do you see 85 degrees C? The humidity sensor or the cold finger sensor?
How often do you see the reading?
Did you have issues with the old firmware/driver?
Can you disconnect from the camera, then hold shift while connecting in APT and when choosing the camera go to properties and tick "Trace on". That will enable logging. The logs will be saved in Documents/ASCOM folder. Seeing the log when the temperature is not correct may give me a clue...
edit: also does the temperature stay at 85C or does it only show 85C for a second and then go down again?
Last edited by luka; 18-03-2017 at 11:05 PM.
|