|
Alright getting somewhere with the BT module.
I deleted the COM ports in the registry and they were re-mapped and assigned and are now correct in the Gemini ASCOM driver selection.
If I select and connect to COM9, the outgoing port, I see the BT transceiver led goes from "flashing" to "on" for around 5 seconds then back to flashing. This does not happen with other ports selected.
So it appears COM9 is talking to the transceiver. But the Gemini is not accepting or responding this incomming transmission. Folks at Gemini ASCOM said the Gemini is a bit picky about time outs from wait for reply and COM port Tx rates so I have a bit to fiddle with.
|