View Single Post
  #5  
Old 01-03-2023, 09:08 PM
Startrek (Martin)
Registered User

Startrek is offline
 
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 6,120
I have 230V mains to my NexDome and installed 2 x Double weatherproof outlets to my work station bay for all equipment ( and dual data outlet )
I ran 2 x 2m 12V LED strips ( white led ) with double sided tape on both halves of the Dome on the wall at 1200mm ffl with plug in led drivers. A weatherproof switch was installed inside the Dome at the door
All cabling is run in 20mm pvc corrugated conduit
I’m a retired large commercial/industrial electrical contractor so it was a couple of hours to fit it all out . Everything is plug for ease of maintenance etc..
I chose white LED as my rig is controlled from inside the house so the only time I enter the Dome is to initially set up , change filters etc .. and shut down.

Some attached photos during fit out 2 years ago and the latest rig
Carpet tiles lasted a month , pulled them all out as they were like sponges
Sorry about orientation of photos

Cheers
Martin
Attached Thumbnails
Click for full-size image (21A8EBD7-F4C4-4B28-A555-E1DE001EAB05.jpg)
196.7 KB158 views
Click for full-size image (2F204652-3E32-4164-B155-4155667C9249.jpg)
190.5 KB143 views
Click for full-size image (72DCA5D7-BDF9-415D-9AEE-A6B61625DFAC.jpg)
193.3 KB102 views
Click for full-size image (78DB83B2-358C-4CFA-8041-B5E0CD05F97A.jpg)
189.0 KB118 views
Click for full-size image (E011886B-F680-447E-86C2-32009AFFCF7F.jpg)
191.9 KB121 views
Reply With Quote