Quote:
Originally Posted by amitk75
Alex,
So what you means is that when I remove the filters assembly, i have removed all 3 filters right? And the front means facing the lens?
Is there any test for checking the antialias filters presence or absence?
Sorry if I am sounding dumb and asking same questions again and again... Just need to be sure on what i have done
|
http://www.iceinspace.com.au/forum/s...5&postcount=39
Is this helpful visualizing the filter assembly? It's a Canon 1000D sensor.
The glass in the bag is the AA filter (the very front piece of glass with the dust cleaning element) removed from the plastic sensor frame. The other images show a method to remove the IRcut filter and replace the AA filter so that the sensor face is sealed and protected from moisture - you can ignore this part, if you wish.
To remove the filter assembly you need to remove the two screws and pry the plastic frame off the sensor face -
is this what you really want to do? Even doing a full spectrum mod I would leave the frame in place.
http://www.iceinspace.com.au/forum/a...e.php?a=181527 IRcut filter following removal stuck to the double sided tape.