View Full Version here: : em-10 power connect
dannat
24-11-2010, 06:30 PM
i have just received a secondhand em-10 with original plastic battery case which takes 8-D cells.can i use this with my sealed 12V battery without hassles?
Hans Tucker
24-11-2010, 06:46 PM
Standard Non-GoTo EM10 can run on 12-24Vdc 0.25A..so yep you can.
dannat
24-11-2010, 07:26 PM
thanks Has - how do most connect the scope to there little round top plate with the 2 screws? is there an adapter which fits the standard vixen rail
RickS
24-11-2010, 07:54 PM
I think something like the VSAD-TAK8 would do the trick: http://www.admaccessories.com/V_Series_Saddle.htm. Check the dimensions to be sure... I have an EM-200 which I think is the same configuration as the EM-10.
Cheers,
Rick.
Hans Tucker
24-11-2010, 10:53 PM
Hi Daniel,
Most Tak owners opt either for the Takahashi Tube Holders which bolt directly onto the mount or the Losmandy D Saddle to mount their scopes. Anacortes in the US does have the M-210 Vixen style saddle Plate. The M-210 saddle plate attaches directly to the Takahashi mount two hole pattern (EM-10/11, EM-200, EM-400). The saddle plate will accept all Vixen tyle narrow dovetails. Rick has also put up an interesting option from ADM.
Cheers,
Hans
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.