matt
17-11-2018, 03:42 PM
Hi,
I have one of these in excellent condition. It has been used just twice, before I realised it was more than I required.
From MoonLite's website:
MoonLite DRO Dual port display controller works with all MoonLite high res stepper motors, both the original stepper motor and the new slip clutch version. The controller has 2 ports so it can run either 2 focusers on separate telescopes at the same time, or one focuser with both a focus motor and a rotator motor. The controller is an ASCOM compliant stepper motor controller that works with all ASCOM based software packages out there today such as Focus Max, CCDSoft, MaximDL, SGP, etc.
MoonLite include non ASCOM based software programs for those who may not want to run ASCOM. The Focus Controller has a remote temperature probe and runs on 12 Volts DC. Included is an adapter. This DRO dual port display controller is designed to be used remotely by a PC or at the scope location using the buttons and DRO display, no PC required. It can do both manual and PC operation at the same time. A USB cable, DB9 motor controller cable, remote temp probe is included along with a 12v Power supply.
Full PC ASCOM compliant SW ability( just install out ASCOM driver).
Full manual operation with position display at the scope and at the PC
Also works with MoonLite's non ASCOM based software for simple operation.
Temperature probe
USB
12 volt power supply
https://focuser.com/products.php
This cost me $750 including postage. Prepared to let it go for $500 shipped.
All questions via private message.
Thanks for looking
I have one of these in excellent condition. It has been used just twice, before I realised it was more than I required.
From MoonLite's website:
MoonLite DRO Dual port display controller works with all MoonLite high res stepper motors, both the original stepper motor and the new slip clutch version. The controller has 2 ports so it can run either 2 focusers on separate telescopes at the same time, or one focuser with both a focus motor and a rotator motor. The controller is an ASCOM compliant stepper motor controller that works with all ASCOM based software packages out there today such as Focus Max, CCDSoft, MaximDL, SGP, etc.
MoonLite include non ASCOM based software programs for those who may not want to run ASCOM. The Focus Controller has a remote temperature probe and runs on 12 Volts DC. Included is an adapter. This DRO dual port display controller is designed to be used remotely by a PC or at the scope location using the buttons and DRO display, no PC required. It can do both manual and PC operation at the same time. A USB cable, DB9 motor controller cable, remote temp probe is included along with a 12v Power supply.
Full PC ASCOM compliant SW ability( just install out ASCOM driver).
Full manual operation with position display at the scope and at the PC
Also works with MoonLite's non ASCOM based software for simple operation.
Temperature probe
USB
12 volt power supply
https://focuser.com/products.php
This cost me $750 including postage. Prepared to let it go for $500 shipped.
All questions via private message.
Thanks for looking