View Full Version here: : Eq6-r pro
AstroBogan
17-10-2018, 09:54 AM
Hi all,
About to upgrade my mount to a Skywatcher EQ6-R PRO.
My questing is for those who control theirs through EQmod. for my HEQ5 pro, I used a simple Shoestring USB2EQ5 Interface Cable which connected directly to the mount from the laptop.
I see the USB2EQ6 Interface Cable for the EQ6 connects to the hand controller. I want to bypass that completely and have it go directly from my laptop into the mount.
Any suggestions on how to run this type of setup?
that_guy
17-10-2018, 11:08 AM
The eqmod cable replaces the hand controller. It doesnt go in the hand controller.
AstroBogan
17-10-2018, 11:20 AM
https://www.bintel.com.au/product/shoestring-usb2-eq6-interface/
How does this connect to the mount? Do I need adapters?
Jackstar
17-10-2018, 11:32 AM
I got this for mine, worked perfectly on stellarium set up.
Jack
http://https://www.firstlightoptics.com/astronomy-cables-leads-accessories/lynx-astro-ftdi-eqdir-usb-adapter-for-sky-watcher-eq5-pro-heq5-syntrek-pro-az-eq5-gt-az-eq6-gt-and-eq8-mounts.html
brisen
17-10-2018, 11:45 AM
It plugs in, in place of the hand controller, and you tighten the two screws on either side. But this is the one for the older mounts.
I might be wrong, but I though the new EQ6s had a socket as opposed to the serial port setup they used to come with. Just check this before you order the cable to ensure you get the right one. There is a specific cable with the socket plug on one end and the USB on the other as I got one last week for the EQ 8.
Brian
AstroBogan
17-10-2018, 01:01 PM
Yeah pretty sure it uses RJ45 by the looks of the images.
I believe my best bet to bypass the hand controller is to buy the one that Jackstar has suggested.
Thanks guys :D
AndrewJ
17-10-2018, 02:44 PM
Gday Jacob
I read in yr original post that you already had an EQDir cable for your EQ5
If you still have that, it should work in the EQ6-R, as the RJ45 pinouts are still the same.
Andrew
that_guy
17-10-2018, 04:26 PM
Yeah the eq6r and azeq6 uses the the bt2eq5 and usb2eq5.
Startrek
18-10-2018, 09:12 PM
Hi Jacob
Here’s the procedure to set up EQMOD, StellariumScope and Stellarium for your new EQ6-R Mount
2nd post to follow with remainder of procedures
Cheers
Startrek
18-10-2018, 09:14 PM
Hi Jacob,
Remainder of procedures
Cheers
AstroBogan
19-10-2018, 11:24 AM
Thanks Martin, I have these procedures pretty much sorted as it doesn't seem to differ much from when I was using my HEQ5 pro with EQmod and stellarium :P
Appreciate the help and I am sure that anyone else first starting with ASCOM and EQmod will appreciate this!
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.