PDA

View Full Version here: : PHD2 Calibration


boz_m
14-09-2018, 07:42 PM
Hi all,
When i am doing the calibration in PHD2 should i be aiming the scope at the celestial pole?

kens
14-09-2018, 07:43 PM
No. If you are ASCOM guiding then point near dec 0 and well above the horizon. If you are St4 guiding then point at your target.

boz_m
14-09-2018, 07:50 PM
cheers. i think i did this, at dec = 5 degrees, ra = 17 hours
the pic attaches is my calibration review. does it look normal/ok
thanks

kens
14-09-2018, 09:14 PM
Looks reasonable. There's a lot of backlash evident.