alternatives for timing belts PMX?

[graham.hobart]

Hi
Seeing as the replacement 30$ US timing belts on the software bisque site for the PMX mount are then 95US post + tax = 150US !!!
are there any other manufacturers you can use ? the thread and pitch are given in the blurb on the site more information is available for this product ?
SDP-SI.com (http://www.sdp-si.com/) Part Number:
A 6B16-100025
Unit:
Inch
Belt Type:
Single Sided
Pitch:
.080" (MXL)
No. Of Grooves:
100
Belt Width:
1/4"
Material:
Urethane
Tension Member:
Kevlar
Pitch Length:
8.00"

[cfranks]

I get mine from www.smallparts.com.au in Queensland and they usually have them in stock.

Charles

[gregbradley]

I'd ask them to send you one for free as they were out of line putting the cheapo defective belt in their expensive PMX in the first place.

Wouldn't it have to be set to an exact length?

Greg.

[AndrewJ]

Gday Greg

If you get a belt of the same tooth pitch/profile ie 0.080"(MXL) and the same tooth count ie 100, it will be the correct length.

Andrew

[Logieberra]

I purchased MX belts in Aus. The newer grey kind (not black).

I had provided the details to another member on here, Chris Venter, but he never responded or said thanks!

Hit him up, as it's been many years, and I no longer have my order details.

[graham.hobart]

:thumbsup:
cheers all:thanx:

[UniPol]

I had great success in buying belts for my workshop equipment with http://www.edingtonagencies.com.au/Power-Transmission

[graham.hobart]

:thumbsup: